{"product_id":"aliphatic-urethane-concrete-sealer","title":"Aliphatic Urethane Concrete Sealer","description":"\u003ch2\u003ePremium urethane toughness. Water-based ease.\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eAliphatic Urethane Concrete Sealer\u003c\/strong\u003e gives concrete a hard, long-wearing, clear medium-gloss finish that is tougher than water-based acrylics. It is single-component and water-based: no mixing, no special equipment, and tools clean up with water.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt to wear.\u003c\/strong\u003e Superior abrasion and solvent resistance, and a hard, long-wearing surface at full cure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShrugs off spills and stains.\u003c\/strong\u003e Excellent resistance to water, alkali, acids and stains.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade for sun and weather.\u003c\/strong\u003e Excellent UV resistance, and its vapor permeability allows it to be used outdoors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClear finish that shows the concrete.\u003c\/strong\u003e Goes on milky, dries clear in less than an hour, and leaves a medium gloss that darkens the surface slightly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy to apply.\u003c\/strong\u003e Roll it on with a 1\/4\" short-nap roller or use a pump-up sprayer. Low VOC (under 100 g\/L), quick to dry and fast to recoat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne sealer, many jobs.\u003c\/strong\u003e Use it alone on bare concrete, overlays and micro toppings, or as a finish coat over epoxy for added wearability. Indoors, outdoors, floors and vertical surfaces.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhere to use it\u003c\/h3\u003e\n\u003cp\u003eBasements, foyers, warehouses, stores, restaurant floors, kennels, concrete countertops and brick hearths, or almost any surface that needs an abrasion-resistant, low-mil coating. On vertical surfaces, its properties against graffiti make it a good coating.\u003c\/p\u003e\n\u003ch3\u003eHow to apply\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrep.\u003c\/strong\u003e The surface must be sound, clean, dry and free of oil, grease and other bond inhibitors. Profile to at least a 200-grit level, or until it readily absorbs water. Neutralize any acid etch. Moisture content must be 30% or less on an electronic moisture meter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck conditions.\u003c\/strong\u003e Follow the Product Data Sheet for application conditions. Don't apply if rain is expected within 48 hours or humidity is above 80%.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApply thin.\u003c\/strong\u003e This is a 2 mil coating. Use a 1\/4\" short-nap roller (microfiber or woven) or a pump-up sprayer, and keep rolling it out for an even finish. Never use a foam roller: it puts air into the material and causes bubbles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecoat.\u003c\/strong\u003e Wait at least 1 hour, or until tack-free. Two or three light coats give the best results.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eA bluish haze can appear on some surfaces while it cures. That is normal.\u003c\/p\u003e\n\u003ch3\u003eCoverage and dry times\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCoverage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAbout 250 sq ft per gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDry \/ recoat\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1–2 hours \/ 1–3 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFoot traffic\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4–6 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLight to moderate traffic\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e24 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWheel traffic\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e24–48 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHeavy traffic\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e72 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFull cure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e7 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChemistry\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSingle-component, water-based aliphatic urethane\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFinish\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eClear, medium gloss\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSolids\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e25%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVOC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUnder 100 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFilm thickness\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2 mil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCleanup\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWater\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRemoval\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eChemical stripper or mechanical means\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSizes\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eGallon and 4 oz Sample Jar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eTypical values, not a specification.\u003c\/p\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMay be slippery once cured.\u003c\/strong\u003e Take caution.\u003c\/li\u003e\n\u003cli\u003eKeep it from freezing, including in storage.\u003c\/li\u003e\n\u003cli\u003eApply a test area on the actual surface first.\u003c\/li\u003e\n\u003cli\u003eFor professional use. Read the label and SDS before use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it on a garage or basement floor?\u003c\/strong\u003e\u003cbr\u003eYes. It takes wheel traffic after 24–48 hours and resists water, alkali, acids and stains. Remove all oil and grease, and check the slab with a moisture meter first (30% or less). Work with good ventilation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I put it over epoxy?\u003c\/strong\u003e\u003cbr\u003eYes. It is designed as a finish coat over epoxy or similar coatings for increased wearability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy does it look milky?\u003c\/strong\u003e\u003cbr\u003eThat is normal. It goes down white and turns clear in less than an hour, depending on conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it change the look of my concrete?\u003c\/strong\u003e\u003cbr\u003eIt dries clear with a medium gloss and darkens the surface slightly. Do a test area first.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does it ship?\u003c\/strong\u003e\u003cbr\u003eBy UPS from Olathe, Kansas, typically within 1–2 business days.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs there a tinted version?\u003c\/strong\u003e\u003cbr\u003eYes. \u003ca href=\"\/products\/concrete-stain-seal-interior-exterior\"\u003eConcrete Stain \u0026amp; Seal\u003c\/a\u003e uses the same water-based urethane base, tinted for one-step color and seal.\u003c\/p\u003e\n\u003ch3\u003eDocuments\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0697\/4285\/4381\/files\/PDS_AliphaticUrethaneConcreteSealer_Rev_2026-11-19.pdf?v=1795109078\" target=\"_blank\"\u003eProduct Data Sheet - Aliphatic Urethane Concrete Sealer\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0697\/4285\/4381\/files\/SDS_AliphaticUrethaneConcreteSealer_Rev1.0_2026-11-19.pdf?v=1795109078\" target=\"_blank\"\u003eSafety Data Sheet - Aliphatic Urethane Concrete Sealer\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Pro Mason Supply","offers":[{"title":"Gallon","offer_id":68382549311725,"sku":"AUCS-CLR-GAL","price":114.0,"currency_code":"USD","in_stock":true},{"title":"Sample Jar (4 oz size)","offer_id":68392552759533,"sku":"AUCS-CLR-SJ4","price":8.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0697\/4285\/4381\/files\/aliphatic-urethane-concrete-sealer-6807573.jpg?v=1795161492","url":"https:\/\/promasonsupply.com\/products\/aliphatic-urethane-concrete-sealer","provider":"ProMason Supply","version":"1.0","type":"link"}