Concrete Patch - High Strength Repair
Concrete Patch - High Strength RepairNot sure of the color? Pick the Quart – Sample & Small Project Size to test it at home before the full order.
Couldn't load pickup availability
Not sure which to pick?
Not sure which to pick?
Tell us about your project and the year your home was built, and we'll suggest a good place to start. Ask us here.
Pick Concrete Patch for concrete flatwork repair: cracks, holes and spalls in driveways, sidewalks and patios, in a new-gray or aged-buff color.
| Product | Best for |
|---|---|
| Fast-Repair | Steps and similar high-wear masonry areas; sets in minutes |
| High Strength Concrete Patch (this one) | Concrete flatwork repair, gray or buff |
| High Build (lime) | Soft, breathable patches on historic walls, not steps or flatwork |
Brick or stone steps and other high-wear masonry? Use Fast-Repair. Historic walls? Use High Build lime, but not on steps or flatwork.
- Our concrete flatwork patch - made for driveways, sidewalks and patios.
- Up to 1.5 in. per application - for deep holes and missing sections.
- Lightweight and low-sag - works on horizontal, vertical and overhead repairs.
- Two colors - New Concrete Gray or Aged Concrete Buff.
How the job goes
- 1. Prepare. Clean the surface and dampen it with water.
- 2. Mix. Add the least water that gives a workable mix, rest 5 minutes, then remix.
- 3. Place and finish. Trowel or brush it on, then tool, brush or carve as it sets.
Sizes
- Quart (sample and small projects)
- Gallon (standard size)
Safety: wear gloves and eye protection when mixing and handling.
More about Concrete Patch
Concrete cracks, chips and spalls, especially where it meets weather and traffic. Concrete Patch is a pre-blended repair mortar made for concrete flatwork such as driveways, sidewalks and patios, and also works on concrete walls.
Clean the area and dampen it with water. Add the minimum amount of water needed for a workable mix, let it rest for 5 minutes, then remix. Place up to 1.5 inches in a single application. We recommend working when it's above 40°F, and protecting fresh work from freezing while it cures.
It is lightweight and low-sag, so it stays put on vertical and overhead surfaces as well as flat ones. Trowel or brush it on, and tool, brush or carve the surface as it sets so the patch takes on the texture around it. Choose New Concrete Gray for fresh concrete or Aged Concrete Buff for older, weathered surfaces. It is not for thin overlays.
For brick or stone steps and other high-wear masonry, or a repair that needs to set within minutes, use Fast-Repair. For historic walls where a breathable lime repair matters, use High Build; pure lime patches are generally too soft for steps or flatwork.
Share

Let customers speak for us
from 206 reviewsMy handyman was able to patch a section of mortar on my limestone. It was quick and easy from ordering to delivery to results.
The stain worked perfectly.
We are using this mortar for our stone wall restoration project, and so far we are very happy with the results. The mortar is easy to work with, and the color blends nicely with the existing stonework. Good quality product!
After visiting the shop and talking to the team i got the right mortar to repoint my stone foundation and brick work with powered dyes. The softer and natural tone compared to using bigbox type N grey mortar product keeps the integrity of my 110yr home without looking like a bad diy patch job.
Came out beautiful and better than I had hoped
Shipped quickly. Arrived quickly. It mixed easily and adhered to my spalling bricks. So far so good.
The perfect mortar for 126 year old bricks (granite boulder and brick foundation built in 1900). Very happy with the mortar and clear instructions. Thank you ProMason!
Worked perfectly. Stain changed color of existing brick to the tone I was expecting giving it new life and blends with other new finishes.
I haven't had a chance to mix and use the mortar yet. However, the customer service is great. They immediately sent a replacement package of colorant since the original had leaked.
Our project turned out wonderful! What an amazing difference. It completely changed the look of the house!!
Easier to apply than I anticipated.
My first time staining brick and I was nervous on how it might turn out because I was going from dark brown tone bricks to gray tone (before and after photo submitted)Blended my own color combo and It looks amazing.
The stain covers well and a quart did a good amount of surface area. The perfect shade was achieved by mixing 2 colors. It looks great and is a nice brick border update!
The masonry sealer worked great. It was easy to apply and dried perfectly.
So far, so good. It will take time.
I just tried the mortar out. Need to learn a little more about using it as what I applies turned white. Yes it was sunny and hot. I tried keeping it spritzed and ended up shading the work with tarps, but too late. I’ll try again next week since I see a cloudy day in the forecast. Marie