Pro Mason Masonry Restoration Cleaner

ProMason Masonry Restoration Cleaner is a professional-grade concentrate for removing dirt and soils, cement film, mortar smear, stucco splash, mineral scale, and carbonate efflorescence from compatible brick and masonry. It is sold for trained masonry and restoration crews—not for household consumer use.

Always test a small, inconspicuous area first. Read the enclosed Safety Data Sheet (SDS) and Product Data Sheet (PDS) before opening the container.

Professional Use and Required PPE

This cleaner is classified DANGER: causes serious eye damage, may be corrosive to metals, and is harmful if swallowed.

• Wear eye or face protection and chemical-resistant gloves whenever handling concentrate or working solution.
• Wash hands thoroughly after handling. Do not eat, drink, or smoke when using this product.
• Keep only in the original closed polyethylene container. Keep out of reach of children.
• Do not mix with bleach, ammonia, oxidizers, or other cleaners.
• Do not store or pump in aluminum.

If the product gets in the eyes: rinse cautiously with water for several minutes, remove contact lenses if present and easy to do, continue rinsing, and immediately call Poison Control at 1-800-222-1222 or a doctor. Full first aid is on the bottle and SDS.

Ground Shipping Only

This product cannot be shipped by air freight. ProMason ships Masonry Restoration Cleaner by ground / highway only. Air, overnight air, and other air-carrier services are not available for this SKU. Choose ground at checkout. If an air method is selected, the order will be converted to ground or cancelled and rebooked.

What This Cleaner Is For

Use this masonry restoration cleaner when you need a concentrated jobsite acid cleaner for:

• Cement film and mortar smear after pointing, washing, or new work.
• Carbonate efflorescence and mineral scale on compatible brick and masonry.
• Stucco splash and other cementitious residue on approved masonry.

This is a stronger restoration cleaner than a mild mortar wash. It is not a general household degreaser and it is not Pro Mason All Surface Cleaner.

Surfaces and Limits

• Typically evaluated on: fired clay brick and other approved, acid-tolerant masonry after a passing mock-up.
• Do not use on: limestone, marble, travertine, or other calcareous stone.
• Do not use on: historic lime mortar unless a mock-up on that exact wall passes.
• Protect adjacent metal, glass, painted finishes, plants, and soil. Rinse thoroughly.

How to Use

1. Read the SDS and PDS. Put on eye or face protection and gloves.
2. Pre-wet the masonry with clean water.
3. Dilute the concentrate only as directed on the Product Data Sheet. Never apply undiluted unless the PDS for that soil type says to.
4. Apply with appropriate masonry equipment. Allow the stated dwell time. Do not let the cleaner dry on the wall.
5. Agitate if needed, then rinse thoroughly from the top down with clean water.
6. Neutralize and dispose of residue according to local rules and the SDS.

Coverage and dilution vary with soil load and substrate. Use the PDS chart and a test panel—do not guess.

In the Package

• ProMason Masonry Restoration Cleaner concentrate
• Safety Data Sheet
• Product Data Sheet with dilution, substrates, and full directions

Need help matching this cleaner to a wall? Contact ProMason Supply with photos and the masonry type before you buy.